Illustrative conceptProduction Guides
What to include in a 3D printing quote request.
A useful brief helps the team ask better questions and review your project.
Practical guidance for your next 3D printing project.
Understand what to prepare, what affects cost and what to review before a production run. Start with the guide closest to your project.
21 items shown.
Featured guides
- Illustrative concept
Illustrative conceptProduction Guides
What affects the cost of a 3D printed production run?
Look beyond material weight to the work required to deliver the order.
Illustrative conceptProduction Guides
How to review a sample before a batch.
Agree the details that should guide the production run.
Studio News
Studio News · October 14, 2026
How to Decorate a Work Desk Without Losing the Desk
What your office actually allows, how much desk is left once the monitor is on it, the five item ceiling, what the camera sees on a call, and what heat and sun do to the things you put out.
Studio News · October 14, 2026
Nightstand Decor Ideas: What Earns a Spot by the Bed
What the nightstand has to do at two in the morning, how tall the lamp should be, where the charger and its cable go, why candles by a bed should be LED, and what fits on a small table.
Studio News · September 15, 2026
How to Decorate a Console Table: Entry, Hall or Sofa
What your console has to do every day, how to size the mirror above it, the one tall, one grounding and one low rule, where the lamp plugs in, and why LED candles belong by the front door.
Studio News · September 15, 2026
Decorating With Large Vases: Placement, Fillers and Scale
Where a large vase looks best, how to size it against the furniture beside it, what to put in a tall floor vase, whether it can hold water, and how to keep a light vase from tipping over.
Studio News · September 15, 2026
How to Hide Cords on a Desk: A Setup That Stays Tidy
One power strip under the desk, one cord to the wall, a fixed spot for the cables you use every day, and the popular fixes that trap heat. How to hide cords on a desk so it stays tidy.
Studio News · September 14, 2026
How to Display Sculptures at Home (Collected, Not Cluttered)
Where a sculpture reads best, how to size it to the spot, how to group a collection so it looks planned, how to light it, and what to check so a light resin, ceramic or 3D printed piece stays upright, unfaded and free of dust.
Studio News · September 10, 2026
Mantel Decor: How to Decorate a Fireplace Mantel (Lit or Not)
A mantel is the one surface the whole room faces, and sometimes it sits over a real fire. How to choose and size the piece above it, build the two ends, leave a third of it bare, and decide what should stay off a mantel you actually light.
Studio News · September 4, 2026
How to Paint 3D Prints (When You Did Not Print Them Yourself)
Most painting guides are written by printer manufacturers for people who own printers. This one is for the person holding a printed sculpture they bought: how to identify the material, when sanding costs you the detail you paid for, whether PLA actually needs primer, and how to seal it.
Studio News · September 4, 2026
Bookshelf Decorating Ideas That Still Leave Room for Books
A bookcase is not one shelf, it is five or six read as a single composition — and the books are material you already own. How to divide the unit into slots, place the anchors first, and keep the books without the whole thing looking like storage.
Studio News · September 2, 2026
How to Organize Your Desk (A Layout That Survives a Busy Week)
A desktop does not get messy the way a drawer does. This is a layout built around traffic: a footprint budget for the surface, three zones measured from where you sit, one direction for paper, and a two-minute reset that keeps it all in place.
Studio News · August 24, 2026
Food Safe 3D Printer Filament: What the Label Actually Covers
Studio News · August 19, 2026
How to Organize Desk Drawers (Without Redoing It in a Month)
Studio News · July 8, 2026
3D Printed Gifts: Custom Ideas for Any Occasion
Print Foundry shares unique 3D printed gift ideas, custom design options, materials, and tips for personalized presents for any occasion.
Studio News · May 25, 2026
How Custom Orders Work
The three-step process behind every custom piece we make.
Studio News · May 25, 2026
Welcome to Print Foundry
A quick introduction to the studio, our process, and what makes Print Foundry different.